Posts by corris
log in
1) Message boards : Number crunching : Intel GPU (Message 23995)
Posted 249 days ago by corris
I run an INTEL Intel(R) HD Graphics 530 (6512MB) OpenCL: 2.00 on windows 10 x64


I also get comp errors with that exact err message in Stderr file if I use any driver higher than 20.19.15.4444



Whenever I do an update (and the driver gets caught and updates as well) I have to restore the above driver and all's OK again
2) Message boards : Number crunching : Validator stuck (intermittently) ? (Message 23536)
Posted 406 days ago by corris
TY Tackleway


One of the pendings WUs has left the queue ... I'll now just follow your advice and wait for the others to go at the appropriate time.


Thankx again
3) Message boards : Number crunching : Validator stuck (intermittently) ? (Message 23498)
Posted 411 days ago by corris
Hello

Most of my WUs are OK and get validated in good order.
But some are stuck in validate pending, and some of these have been there for a couple of days or so

Is validator "forgetting" some WUs in its Q ?
4) Message boards : Number crunching : Why am I getting no tasks? (Message 22414)
Posted 610 days ago by corris
yep, inclined to agree with scubaroboto


regardless of of what server status page shows, have not been able to send/receive tasks for 24 hours now.

boinc manager cannot talk to project at all
5) Message boards : News : Sieve in Production; Large and Solo deprecated (Message 21451)
Posted 834 days ago by corris
I wrote in the original message, I've installed Visual studio 2012 c++, and yet you advise me to install 2013 C++ runtime 32/64. So I decided to give it a chance, but when I try installing it it asks if I would like to modify installed component, remove, repair both for 32/64. Any other bright ideas rather than this?



Hi

I did similar, ran Repair for both 32 & 64, and all OK afterwards

Hope Repair does same for you.....
6) Message boards : News : Sieve in Production; Large and Solo deprecated (Message 21450)
Posted 834 days ago by corris
Ooops --- double post, sorry
7) Message boards : Number crunching : Help Please if poss - intel gpu & sieve (Message 21384)
Posted 839 days ago by corris
RightO, I re-installed the 2 files (or repaired the installation according to the installer), and now got a sieve to work....

Seems that the first time I installed failed even though installer reported success


Thanks, hopefully now all ok


Thanks again
8) Message boards : Number crunching : Help Please if poss - intel gpu & sieve (Message 21379)
Posted 841 days ago by corris
Hello



Moved from running mini ok to sieve with 100% error rate



My rather olde setup:-

win7 pro 64bit intel i5-3230M cpu on intel HD Graphics 4000 (1624MB) OpenCL: 1.01

boinc version 7.6.9

installed vcredist_x64.exe & vcredist_x86.exe for ms c++ runtime (got these from a search of the net) no idea if they are correct or not

created .....<app>.config for both 64 and 32 as:
verbose=1
kernels_per_reduction=48
threads=6
lut_size=12
sleep=1
reduce_cpu=0
sieve_size=26




Tried different parameters in above files with no success







Either I am doing something wrong that is blindingly obvious to all but a lamebrain (me), or else sieve will not work on such intel gpu





Is anyone able / willing to advise?
9) Message boards : Number crunching : (unknown error) - exit code -1073741515 (0xc0000135) (Message 21354)
Posted 842 days ago by corris
I am now getting intel gpu sieve WUs

Still same error code, but now some (very) few seconds processing until error - before installing the 2 files above processing was 0.00 seconds before error

At a guess, I've got the wrong 2 files ... any ideas which are the correct ones?


Thanks
10) Message boards : Number crunching : (unknown error) - exit code -1073741515 (0xc0000135) (Message 21351)
Posted 843 days ago by corris
Yep, I seem to have moved onto sieve from the minis I was running before

win7 pro 64bit on intel HD Graphics 4000 (1624MB) OpenCL: 1.01


Trawled the net for MS c++ runtime, got directed to these 2 files & so installed them : vcredist_x64.exe & vcredist_x86.exe ( no idea if these are the correct files)


Tried to download again but boinc event log says there are no intel WUs available




Any ideas or has Intel been dropped?
11) Message boards : Number crunching : (unknown error) - exit code -1073741515 (0xc0000135) (Message 21348)
Posted 843 days ago by corris
All WUs suddenly erroring with this error code in stderr output

Running intel gpu opencl 1.1




Are intel WUs now unsupported?





Please advise if anyone has a clue



Thanks




Main page · Your account · Message boards


Copyright © 2018 Jon Sonntag; All rights reserved.