Posts by Rantanplan
log in
1) Message boards : Number crunching : On Windows 10 -> DONT THROW UR OLD RADEONS AWAY (Message 23911)
Posted 320 days ago by Rantanplan
Hey folks !

I discovered something i would tell to ya.

U know there only these drivers to install in Windows 10, but they don`t have OpenCL.

http://support.amd.com/de-de/download/desktop/legacy?product=legacy3&os=Windows+10+-+64

Someone was clever to use OPENCL afterall of that.

Guess he wrote a small site, but it wasn´t me. Cheers !

https://www.christianackermann.de/2016/07/amd-fehlender-opencl-support-crimson-unifl-legacy/

I´m sorry it´s only german.
2) Message boards : Number crunching : Using an iGPU from Intel to crunch ? Now watch this... (Message 22741)
Posted 549 days ago by Rantanplan
Hey folks i just went back to use my iGPU to crunch , sofar so good.

Then i thought, is that all ? I mean always said you can`t overlock a Celeron G1820 cpu, but what´s about graphics ?

So i overclocked easaly my graphcis core +200 Mhz , temps at 56°C.

You could do that too, but it´s always dangerous to you cpu, i just want to remind you about this before.

https://downloadcenter.intel.com/de/download/24075/Intel-Extreme-Tuning-Utility-Intel-XTU-

It´s from Intel and easy to use, cross your fingers if u clock. :D
3) Message boards : Number crunching : Errors while computing (Message 22738)
Posted 549 days ago by Rantanplan
https://boinc.thesonntags.com/collatz/result.php?resultid=83621784

Unknown Error Number 55 dec 0x37 hex
4) Message boards : Number crunching : OpenCL cpu crunching time dropped nearby to NOTHING (Message 22228)
Posted 653 days ago by Rantanplan
Well folks,

Now see that results: (only Maxwell and Kepler support)

http://boinc.thesonntags.com/collatz/result.php?resultid=59247497
http://boinc.thesonntags.com/collatz/result.php?resultid=59230383

There is only one download location left, sorry.
http://drivers.softpedia.com/downloadTag/NVIDIA%20GeForce%20Vulkan%20356.45%20Beta

It will have no effect on crunching end time
and will not save very much energy.

Just for counting the numbers ;D

Have fun !
5) Message boards : Number crunching : Both AMD and Nvidia card -> Using only OpenCLNV runs slower (Message 20049)
Posted 1166 days ago by Rantanplan
Cruel thing.

I have both AMD/Nvidia card installed. If I run only OpenCLNV wus , they are running double the time longer than I run both OpenCLAMD and OpenCLNV wus at the same time.

Also tried SWAN_SYNC=0 , no effect.

Whats that !? Driver issue ?

Greetings

Edit:

ohw , i went wrong, must be wu specific , running both cars and a wu took longer than 7 minutes, before just 5 minutes.
6) Message boards : Number crunching : How i activate OpenCL CPU drivers in BOINC (Message 19729)
Posted 1276 days ago by Rantanplan
i did it, great show.

it was the AMD OPENCL SDK pakage.

installed , now i got OPENCL CPU capability.

so easy : D
7) Message boards : Number crunching : How i activate OpenCL CPU drivers in BOINC (Message 19728)
Posted 1276 days ago by Rantanplan
Hello,

here i got an old E6750 , and with no furver installation of any drivers, this cpu supports Intel OpenCL crunshing. It crunshes with 2 cpus.

Great show, but i am using a Quad i5 , and there is no OpenCL CPU support enabled.

What have i to do to run this quad with OpenCL CPU tasks ?

Greetings.
8) Message boards : Number crunching : Will 4.07 (opencl_ati_100) run on a single precision card ? (Message 16744)
Posted 1690 days ago by Rantanplan
13.1 , should i update to 13.4 ? I will make it,

still getting 4.07 solo wus and errors , but using W7 Prof 64-Bit.


Edit:

OK cheers ! Solo_collatz running well, using 13.4 whql drivers. Great !
9) Message boards : Number crunching : Will 4.07 (opencl_ati_100) run on a single precision card ? (Message 16735)
Posted 1690 days ago by Rantanplan
Thx for the advice, so i will switch to solo_collatz and see.

Great thanks , and thumbs up !

10) Message boards : Number crunching : Will 4.07 (opencl_ati_100) run on a single precision card ? (Message 16732)
Posted 1690 days ago by Rantanplan
Can't get 4.06 AMD apps , whats wrong ?
11) Message boards : Number crunching : Will 4.07 (opencl_ati_100) run on a single precision card ? (Message 16613)
Posted 1700 days ago by Rantanplan
I wend wrong :(

Its app version 4.06 which errors .
12) Message boards : Number crunching : Will 4.07 (opencl_ati_100) run on a single precision card ? (Message 16606)
Posted 1700 days ago by Rantanplan
Thought u took me wrong ...

Its all about the new version number 4.07 , described wus are all 2.09 version numbers, i also began to crunsh these new wus but failed.

greets !
13) Message boards : Number crunching : Will 4.07 (opencl_ati_100) run on a single precision card ? (Message 16557)
Posted 1704 days ago by Rantanplan
Hello , simply question, what is the answer ?

Running a HD 5770 AMD card.

Greets ! :)




Main page · Your account · Message boards


Copyright © 2018 Jon Sonntag; All rights reserved.